Installing Renntech Lowering module V2

cb1965

Banned
Joined
Mar 1, 2013
Messages
1,266
Car
N/A
Anyone have any direct experience of installing one of these lowering modules on a car with ABC

It looks reasonably straight forward although MBWorld had a thread where they said the instructions are misleading.

Would rather do it myself if it's as straight forward as it looks, but if anyone here has any tips I'd be glad to hear them.

Car is an R230 SL btw if that makes any difference.
 

BlackC55

Authorised Forum Sponsor
SUPPORTER
Joined
Feb 8, 2007
Messages
19,908
Location
Portsmouth, Hampshire.
Car
E55K SL500 E250X2 Smart44 Brabus Track car E450Cabriolet X350 Pick up
I have fitted loads of them.

Only do it if you are experienced with wiring as it's easily messed up.
 
OP
OP
C

cb1965

Banned
Joined
Mar 1, 2013
Messages
1,266
Car
N/A
Experienced with wiring??? Hmmmm. Hard to say. I know how to extract pins from plugs and re-insert them and how to splice into wires etc. but have never attacked an SL before.

I feel competent enough to do it as long as the pin-outs on the instructions are right as there seemed to be some doubt on MBWorld.

If you weren't 300 miles away I would probably have you do it, but no one in Lancashire/Manchester seems to have experience of these.
 
OP
OP
C

cb1965

Banned
Joined
Mar 1, 2013
Messages
1,266
Car
N/A
You will be fine. The instructions are clear. Don't worry.

Cheers, will report back especially if it goes t1ts up LOL!
 

Users who are viewing this thread

Top Bottom