Ipod harnes loop problem

Page may contain affiliate links. Please see terms for details.

hercules

Active Member
Joined
Dec 7, 2002
Messages
227
Location
Kent
Car
W203 2006 180K Sport Edition & ML164 sport
Is it normal to have comunication IC problem when connect Ipod wiring harness loom without connecting the interface :confused:
 
I think I can answer this If I'm right.
I just checked the interface connector and If I'm not mistaken I think there is two pair of CAN bus.
Am I Right, so if the interface is not connected there is a open looop CAN.

Right :crazy::doh::doh:
 
Yes. The actual ipod controller box must be connected otherwise you will have CAN issues.
 

Users who are viewing this thread

Back
Top Bottom