Knackered glow plug relay required!

Page may contain affiliate links. Please see terms for details.

Philip1972

Active Member
Joined
Mar 9, 2014
Messages
261
Location
Alvechurch, Worcestershire
Car
E350 CDI convertible 2011
I am after a glow plug relay for an OM642 V6 350 CDI.

Mine is not too good, but I would like to have a knackered one so I can practice soldering in the required wire, before attempting mine!

Thanks

Phil
 
I am after a glow plug relay for an OM642 V6 350 CDI.

Mine is not too good, but I would like to have a knackered one so I can practice soldering in the required wire, before attempting mine!

Thanks

Phil


I must have thrown so many away. I’ll have a look if there is on laying about at work.

There doesn’t seems to be an obvious way of taking them apart?
 
I must have thrown so many away. I’ll have a look if there is on laying about at work.

There doesn’t seems to be an obvious way of taking them apart?


Would appreciate that!

From what I can find on the web, you need to cut the top open to expose the wiring. If it is what I think it is, you can solder 2 3 new wires in.

However, this is for learning more than anything! I dont want to take mine off, take it to bits and then screw it up, which would leave me stranded!
 
I did mine on the Chrysler a couple of weeks ago but threw the old one away
 

Users who are viewing this thread

Back
Top Bottom