limp mode

Page may contain affiliate links. Please see terms for details.
Well update the abs sensor has been replaced and bearing and also a new egr fitted total cost £300
The abs/esp lights now have cleared and that is fine, he took car on a run up to 75mph came back I take care away about 20 minutes after getting car the car goes in limp mode again ans engine light is on. Turn ignition off limp mode goes off but engine light still on once driving limp mode kicks in.
mechanic also checked all vacuum pipes etc when did the jobs and suggests may be something that controls the egr valve a sensor or summit any ideas
Also to add must admit the car does seem
Flat as well and the mechanic did mention it don’t have much oomph for a 2lire diesil
 

Users who are viewing this thread

Back
Top Bottom