Lowered C43 but sitting higher now

Page may contain affiliate links. Please see terms for details.

zaen1

Active Member
Joined
Apr 10, 2015
Messages
91
Location
Birmingham
Car
c200 sport/c43 amg
Hi guys, wondering if any one can help out with this one,recently had the C43 W202 Lowered using H&R 29377-1 Springs also changed to new bilstein shortened shocks and while i was at it replaced the front lower and upper wishbones,ball joints,ant roll bar etc but the car is now sitting higher than it was originally with a 2 finger gap between tyre and wing lip, used no1 spring pads front and no2 rear. Could it be the spring pads not sitting in those cup things properly or have i done something else wrong. Any help would be much appreciated.
 

Users who are viewing this thread

Back
Top Bottom