M271 Camshaft issue

Page may contain affiliate links. Please see terms for details.

RRich

New Member
Joined
Oct 17, 2015
Messages
12
Car
E Class
Hi all,

I have a E200 CGI 2011 cabriolet with 61k on the clock.

At 57k I had the EML come on with the fault relating to the camshaft sensors which were replaced at a cost of £500.

The check engine light came on last night and I'm being told that it is the same issue. The sensors were cleaned and checked.

I was told that if the light were come on again I should look to replace the car as it is a common fault on the M271 engine.

My knowledge is quite limited on this , but I've only had the car a couple of years and it has always run perfectly. Ideally I want to keep it a couple of more years!

Does anyone have a similar experience? I have checked the existing M271 thread but the issues appear on slightly older engines?

Many thanks
 
Hi
I have good experience of this on CGI M271 turbo engines
Feel free to email me on Monday and I'd be happy to give you advice

[email protected]
 
Thanks Terry, I will drop you a line.
 

Users who are viewing this thread

Back
Top Bottom