mercmancdi
MB Enthusiast
- Joined
- Feb 18, 2012
- Messages
- 1,205
- Location
- Templepatrick
- Car
- mercedes E320 cdi sport ,vw Tiguan R line , M B cls , bmw convertible
I am working on 06 freelander with the BMW td4 4 engine , if I plug the map sensor out of inlet manifold while engine is ticking over and after plugging
Sensor out it makes no difference is this a sure sign sensor is not working.
I joined a land rover site but advice is very thin on the ground.
So I have always got good advice on here so though I would give it a go after all a sensor is a sensor . Also fitted a egr by pass and it makes the car run worse anyone know why this might be.
Hope post is in right place.
Sensor out it makes no difference is this a sure sign sensor is not working.
I joined a land rover site but advice is very thin on the ground.
So I have always got good advice on here so though I would give it a go after all a sensor is a sensor . Also fitted a egr by pass and it makes the car run worse anyone know why this might be.
Hope post is in right place.
