Christosfazer
Member
Hello to all,
I came back with another question!About two months ago during the maintenance i have a/c circuit refilled!While testing the a/c had a gas leakge about 0.2mbar which was ok for the lead tech so we procced with the gas refill
Today with ambient temp 38Celcious i realized that my ac ON THE DRIVER SIDE was blowing not cold air and ON THE PASSENGER SIDE the air was colder!I stopped the car and i touched the ac hose and it was worm
My car has an error which saying:B1001-007 which is about the cabin PTC internal sensor (M9b1)
Do you believe that this error can be the reason for not blowing cold air my ac?
Can this sensor avoid the ac compessor for starting?
If i put a 120ohm resistance on the sensor cables and the ac ecu can read a 50 deg of celcious may the ac compresor starts?
Thanks in advance,
Christos
I came back with another question!About two months ago during the maintenance i have a/c circuit refilled!While testing the a/c had a gas leakge about 0.2mbar which was ok for the lead tech so we procced with the gas refill
Today with ambient temp 38Celcious i realized that my ac ON THE DRIVER SIDE was blowing not cold air and ON THE PASSENGER SIDE the air was colder!I stopped the car and i touched the ac hose and it was worm
My car has an error which saying:B1001-007 which is about the cabin PTC internal sensor (M9b1)
Do you believe that this error can be the reason for not blowing cold air my ac?
Can this sensor avoid the ac compessor for starting?
If i put a 120ohm resistance on the sensor cables and the ac ecu can read a 50 deg of celcious may the ac compresor starts?
Thanks in advance,
Christos