Mini sand blaster

[lotusmark2]

Has anyone used one of these or have any comments??

 

[Brian WH]

Has anyone used one of these or have any comments??

Not recommended for your new paintwork or your Alloys.

 

[lotusmark2]

Ha Ha Ha
dont think either of those apply to my little Moggy

 

[GRAV888]

Use the aluminium oxide and not the glass beads Mark.
Clean the floor as best you can before starting and then lay down a plastic sheet to catch the shot.
Then you can re-use it if you pick the large rust flakes out.
The machine you are looking at is fine for what you need it for.

 

[Brian WH]

Ha Ha Ha
dont think either of those apply to my little Moggy

Not to be used on your Cat either mate.

 

[lotusmark2]

Not to be used on your Cat either mate.

Thought you may say that

 

[Brian WH]

Thought you may say that

Didn't want to let you down mate.

Actually the Moggie 1000 is one of my favourite old classics. But as you have found out I expect, it needs lots of tender loving care, but is easy to repair unlike our modern cars.

As Grav888 said the equipment looks fine for the job, but messy to use.

 

[lotusmark2]

As Grav888 said the equipment looks fine for the job, but messy to use.

Yeah....
Just think paying 350-500 for someone else to do it is way OTT. Still may end up shelling out though

 

[GRAV888]

Yeah....
Just think paying 350-500 for someone else to do it is way OTT. Still may end up shelling out though

I could get some TNT and blow the rust out for less than that mate

 

[Brian WH]

Yeah....
Just think paying 350-500 for someone else to do it is way OTT. Still may end up shelling out though

Add a bit more for the goggles and mask mate, plus the "shot".

Can't you hire one???

 

[Ian B Walker]

Oy hang on a moment Just make sure that I have all these exbensive cars out of the works before you plug that monster in. Don't want any of that foreign muck drifting round GOOD cars

 

[Gollom]

Oy hang on a moment Just make sure that I have all these exbensive cars out of the works before you plug that monster in. Don't want any of that foreign muck drifting round GOOD cars

When are the exbensive cars coming in then? :bannana: The 300 is running OK

(Thought I'd get that one in before Mark)

 

[Ian B Walker]

Well you never know who may want to park either a Brabus or a certain E55 AMG inside the "Works"

 

[Dieselman]

I would make a shroud over the whole working area as the dust will travel everywhere, also I might be tempted to use a gun that recycles the bead as it is used to reduce the problem.

 

[GRAV888]

Well you never know who may want to park either a Brabus or a certain E55 AMG inside the "Works"

Possibly in 2 weeks

 

[Ian B Walker]

Possibly in 2 weeks

Ahhhh there is a God after all :bannana: :bannana: