GranTouringRacing
New Member
Hi,
So i have an ex ambulance 1997 903 2.9 3T Sprinter and i’m struggling to get information!
The Haynes manual states these were only ever fitted with single piston front calipers but there are several twin piston calipers available from 1995 - 2006?
This old ambulance is being converted into a recovery truck so i am wanting to upgrade the brakes if possible?
Can the twin piston calipers be fitted to the single piston hubs, is there actually a difference in the hubs?
If not any suggestions to beef the front up at all?
I can’t seem to find any caliper/carrier dimensions to see if bolt holes are the same?
Thanks in advance!
So i have an ex ambulance 1997 903 2.9 3T Sprinter and i’m struggling to get information!
The Haynes manual states these were only ever fitted with single piston front calipers but there are several twin piston calipers available from 1995 - 2006?
This old ambulance is being converted into a recovery truck so i am wanting to upgrade the brakes if possible?
Can the twin piston calipers be fitted to the single piston hubs, is there actually a difference in the hubs?
If not any suggestions to beef the front up at all?
I can’t seem to find any caliper/carrier dimensions to see if bolt holes are the same?
Thanks in advance!