ML270 EGR Woes?

Page may contain affiliate links. Please see terms for details.

Walshy300ML

New Member
Joined
Mar 20, 2013
Messages
3
Location
Southend Essex
Car
ML 300 CDI Bluetec, Silver
Hello all, our Ml 270cdi has been going into intermittent limp mode for the last week or so, either full on power, or gutless acceleration, no kick down/low on power etc. I've read the codes with my icarsoft scanner and I've got - "P1403-008- Exhaust Gas Recirculation open circuit" So, does this this mean the egr valve itself is kaput? Or does the "open circuit" mean there's a problem within the wiring somewhere? Thanks everyone
 
Could be a sticky EGR valve. I would at least clean it out before thinking about replacing it.
 
Thanks for your swift reply bob, I took it off and cleaned it in may this year when I did the inlet manifold/swirl flap/servo motor mod, but you never know there could still be a bit of crud lurking in there somewhere!
 

Users who are viewing this thread

Back
Top Bottom