My CL post re-paint...

Page may contain affiliate links. Please see terms for details.

guydewdney

MB Enthusiast
Joined
Feb 14, 2004
Messages
2,911
Location
Porlock, Zomerzet
Car
906 Sprinter 313cdi
Just had my cr re-painted due to the build up of scartches etc over the years...

750 quid from JP Marques near Ayelsbury.

DSC04250.JPG


DSC04254.JPG


DSC04253.JPG


DSC04252.JPG


DSC04251.JPG

This is the bootlid - they 'dent doctored' it..


DSC04249.JPG


DSC04248.JPG



before:-
mercdent1.JPG


and
mercdent2.JPG
 
Last edited:
Awesome :D

btw, good angle for superdeforming on that first pic...
 

Attachments

  • sdguydewdney600.jpg
    sdguydewdney600.jpg
    96.9 KB · Views: 358
is it just me - but the front wheelarch gap is WAAAY to big - especially compared to the back? I have looked at the pads - i have three blob ones - will dropping to 1 blob (is there zero blob?) be enough?
 
guydewdney said:
is it just me - but the front wheelarch gap is WAAAY to big - especially compared to the back? I have looked at the pads - i have three blob ones - will dropping to 1 blob (is there zero blob?) be enough?
If you have 3 dot shims/pads/perches or whatever at the front then you could lower it by up to about 10mm (depending on what thicknesses the w140 perches are) by just changing to 1 dot items.

The sad thing is that it's about £5 for the perches and £100 for the labour to swap them ;)
 
Please have technical discussions in the main forum? :D
 

Users who are viewing this thread

Back
Top Bottom