Hey guys,
I am looking for some help. I have a 2009 Mercedes C300 (W204) and I am doing a 2012-13 front end conversion with the Bi-Xenon headlights. So, I've been working on figuring out the wiring for the headlight, you can see my progress so far here: DIY: 2012-13 Bi-Xenon Headlights fitted on 2009 C300 - Benzworld.org - Mercedes-Benz Discussion Forum
Where I am stuck right now is how to power up the turn signals. It is an LED strip with 5 wires coming out of the circuit board. By going through all the regular combinations of positive/negative with my 12V power source, I am unable to get it to power on. I was wondering if anybody here have done this before or might have access to the wiring schematics for these headlights. Any help would be greatly appreciated. Thank you in advance for any input or advice you guys can offer.
-AT
I am looking for some help. I have a 2009 Mercedes C300 (W204) and I am doing a 2012-13 front end conversion with the Bi-Xenon headlights. So, I've been working on figuring out the wiring for the headlight, you can see my progress so far here: DIY: 2012-13 Bi-Xenon Headlights fitted on 2009 C300 - Benzworld.org - Mercedes-Benz Discussion Forum
Where I am stuck right now is how to power up the turn signals. It is an LED strip with 5 wires coming out of the circuit board. By going through all the regular combinations of positive/negative with my 12V power source, I am unable to get it to power on. I was wondering if anybody here have done this before or might have access to the wiring schematics for these headlights. Any help would be greatly appreciated. Thank you in advance for any input or advice you guys can offer.
-AT