no response accelator on uphill

Page may contain affiliate links. Please see terms for details.

minghan1986

New Member
Joined
Sep 8, 2013
Messages
1
Car
e200 kompressor 211
i have a e200 kompressor auto transmission,211 in 271engine model,my problem is when idling is rpm800,once put in d position,the rpm will drop in rpm600,then the car will be vibrate,and from d to n position,the rpm will highly going to rpm1200 and drop back to 800.the car is driving smooth in flap road,but when u stop at the uphill,in d position,that was like no response on accelerator,even in full pedal,the car still cannot move.i am a specialist in mercedes car too,the car dont have any fault code.was change throttle actuator,accelerator sensor,mas air flow sensor,timing gear and chain complete,air throttle actuator,intake manifold.:wallbash:
 
Do you have a star machine? There was a similar issue with early 271 engines and the remedy was to raise the idle speed, also reset self adaption values. Moving away from that. Is the fuel filter recent and fuel pressure ok? Also, slightly more serious, I have had a diesel car having a similar issue and that was caused by the torque converter. Hope something here helps
 
Also, are all air vent pipes ok at the side of the engine block?
 

Users who are viewing this thread

Back
Top Bottom