Paragon1970
Member
Hi Folks,
I just received a generic OBD2 bluetooth scanner, the cheap ones of ebay and am running Torque on an Android phone.
I started the car from cold and received the following two errors:
P2095 - Powertrain
B Camshaft Position Actuator Control Circuit High bank2 c
P2136 - Powertrain
Throttle/Pedal Position Sensor/Switch A/C Voltage Correlation.
Can anyone explain what these mean, particularly the first one?
Something else to note is that I just purchased this car from a dealer and it has three month warranty or at least thats what I was told.
The other thing I have noticed is that the coil light comes back on for around 30 seconds after starting. So guess this could be a bad glow plug or faulty glow plug control unit?
Any advice would be most welcome.
Thanks!
I just received a generic OBD2 bluetooth scanner, the cheap ones of ebay and am running Torque on an Android phone.
I started the car from cold and received the following two errors:
P2095 - Powertrain
B Camshaft Position Actuator Control Circuit High bank2 c
P2136 - Powertrain
Throttle/Pedal Position Sensor/Switch A/C Voltage Correlation.
Can anyone explain what these mean, particularly the first one?
Something else to note is that I just purchased this car from a dealer and it has three month warranty or at least thats what I was told.
The other thing I have noticed is that the coil light comes back on for around 30 seconds after starting. So guess this could be a bad glow plug or faulty glow plug control unit?
Any advice would be most welcome.
Thanks!