• The Forums are now open to new registrations, adverts are also being de-tuned.

Paintless dent repair

Billy610

Active Member
Joined
Apr 19, 2009
Messages
122
Location
Moodiesburn, Scotland
Car
E350 cdi Sport Coupe
Has anyone here used a paintless dent repairer around the glasgow area? and if so can you recommend them or otherwise?
Cheers Billy.
 
Has anyone here used a paintless dent repairer around the glasgow area? and if so can you recommend them or otherwise?
Cheers Billy.
I'll get you a number on Monday. I have a card for a guy but its at my work.
The guy is a Genius! I saw him take a huge dent out of a Vaux Astra Van after the guy was trying to loosen a wheel nut by jumping on the wheel key and slipped off, results was his elbow putting a HUGE dent right along the crease. Must have been about 2 inch beep by 3 inch long and after it was done you would never have been able to tell it was even there.
I've had my old car's door ding done by him plus a few of my friends cars, and he was down last week taking a dent out of a boxter.
He's probably middle aged and as I've been told has being doing this all his working life.. thats why he's soo good.
BTW its dent devil but I've had a look on the site and cant see his name but I'll pm you his name / number on monday
 
Member: The Dent Guy.
The op wants someone in the Glasgow area
 
ding masters ?
 
Dry ice depend of your location, google it? They are use for parties here, to create the smoke effect, about the CO2 its an air duster, from computerworld or maplin I guess? Ebay might be a good way too.
Olivier
 
Dry ice depend of your location, google it? They are use for parties here, to create the smoke effect, about the CO2 its an air duster, from computerworld or maplin I guess? Ebay might be a good way too.
Olivier

None at Ebay, computerworld or Maplin.
 
Just a warning - if you uses liquid CO2 - be sure you wear thick none textile gloves -- if this gets on your hands you will suffer severe frostbite. If you wear textile gloves - it offers very little protection as the fabric will hold the CO2 against your skin and you may very well lose your fingers.

This is a very dangerous product to use without the necessary safety protection...
 
I'll get you a number on Monday. I have a card for a guy but its at my work.
The guy is a Genius! I saw him take a huge dent out of a Vaux Astra Van after the guy was trying to loosen a wheel nut by jumping on the wheel key and slipped off, results was his elbow putting a HUGE dent right along the crease. Must have been about 2 inch beep by 3 inch long and after it was done you would never have been able to tell it was even there.
I've had my old car's door ding done by him plus a few of my friends cars, and he was down last week taking a dent out of a boxter.
He's probably middle aged and as I've been told has being doing this all his working life.. thats why he's soo good.
BTW its dent devil but I've had a look on the site and cant see his name but I'll pm you his name / number on monday

I wouldn't mind this info myself as I'm in the Glasgow area.

Do you know if such work is pricey ?
 
Just a warning - if you uses liquid CO2 - be sure you wear thick none textile gloves -- if this gets on your hands you will suffer severe frostbite. If you wear textile gloves - it offers very little protection as the fabric will hold the CO2 against your skin and you may very well lose your fingers.

This is a very dangerous product to use without the necessary safety protection...

Good advice, as that is what happened when I tried that method! Left myself with a cold burn on my hand that took three weeks to clear up.

Thanks for the replies, I have a guy coming out tomorrow to look at the dings and give me a price. Fortunately it is for swmbo's fiesta and not my car.
 
So the guy did not appear, so thanks Acci-Dent mobile dent repairs, that's put me back a week!

Still looking for someone who can recommend a bloke who is reliable and been used before.
 
So the guy did not appear, so thanks Acci-Dent mobile dent repairs, that's put me back a week!

Still looking for someone who can recommend a bloke who is reliable and been used before.

PM Sent :thumb:
 

Users who are viewing this thread

Back
Top Bottom