baldsparky
Member
- Joined
- Nov 13, 2013
- Messages
- 47
- Car
- S320
just had some bodywork done on the lower edge of the front wing along with a stone chip rust blister.
The colour is metalic silver.
Looking at the finish head on its very good.
But if you eye from the back looking down the wing and door you can see a shade difference.
Its not bad, but under certain light its there.
The car is 14 years old.
Is a perfect blend with these colours almost impossible.
I have been told by 2 proffesional sprayers that unless you have the whole side done you will never get rid of some difference when viewing at certain angles and light.
Mainly because of the age of the original paintwork.
Is there any kind of polishing product technique that can help the blend.
Comments appreciated
The colour is metalic silver.
Looking at the finish head on its very good.
But if you eye from the back looking down the wing and door you can see a shade difference.
Its not bad, but under certain light its there.
The car is 14 years old.
Is a perfect blend with these colours almost impossible.
I have been told by 2 proffesional sprayers that unless you have the whole side done you will never get rid of some difference when viewing at certain angles and light.
Mainly because of the age of the original paintwork.
Is there any kind of polishing product technique that can help the blend.
Comments appreciated