Part number look up please for Washer jets...

Discussion in 'Parts, Maintenance & Servicing' started by DSM10000, Jul 13, 2018 at 6:05 PM.

  1. DSM10000

    DSM10000 Hardcore MB Enthusiast

    Messages:
    4,187
    Joined:
    Jul 12, 2011
    Location:
    Near Salisbury
    Car:
    E32O CDi Sport, MX5 1.8 Sport, RR 4.2 SC
    Both of the washer jets on our W211 are partially blocked, our Indie has tried to clean them and also used an airline but the spray pattern is still poor so it seems replacement is the only answer.

    MB Newcastle are selling them for £37.68 each and before I order I would be grateful if someone with access to EPC could check the number?

    The part they are listing is : A2118601147

    The VIN is : WDB2110222B353772

    Thanks ;)
     
    clk320x likes this.
  2. Codger49

    Codger49 Hardcore MB Enthusiast

    Messages:
    1,435
    Joined:
    May 21, 2015
    Location:
    South Kent
    Car:
    W209 CLK500, CLK280; W168 A190; E46 325i
    Yup, that's the number for your VIN - A 211 860 11 47 Heated Washer Nozzle.

    PS MB Newcastle's Ebay shop has them marked as out of stock at the moment.
     
    clk320x and DSM10000 like this.
  3. OP
    OP
    DSM10000

    DSM10000 Hardcore MB Enthusiast

    Messages:
    4,187
    Joined:
    Jul 12, 2011
    Location:
    Near Salisbury
    Car:
    E32O CDi Sport, MX5 1.8 Sport, RR 4.2 SC
    Many thanks.

    The out of stock message may be because I ordered the last two and took a chance.
     
    clk320x likes this.
  4. optimusprime

    optimusprime Hardcore MB Enthusiast

    Messages:
    2,384
    Joined:
    Dec 29, 2013
    Location:
    Kidderminster Worcestershire UK
    Car:
    Mercedes W124 260E M103
    Not saying it will work ,,but i did this to mine a few years ago now, and they are still working .Thats if the idea is like those i have on my car .. I pickled up a painters ***** tool .They use them to open up the jet in the old paint striping blow gun . From ebay pence each .Then i played inside the tube and sprayed penetrating fluid in .Left it for a day or so ,then gave it the treatment again the P and the spray untill it was clear .The fluid in the window washers corrode the copper tube , or jet ,its not a jet as such just a bent tube. New one on ebay right now original mb part .
     
  5. OP
    OP
    DSM10000

    DSM10000 Hardcore MB Enthusiast

    Messages:
    4,187
    Joined:
    Jul 12, 2011
    Location:
    Near Salisbury
    Car:
    E32O CDi Sport, MX5 1.8 Sport, RR 4.2 SC
    Thanks but my indie tried a tool on the jets as well as an airline, he blew out the supply lines as well as the jets but with little improvement. Not cheap at £75 for two from MB Newcastle (although over £100 with some suppliers) but good forward vision is vital so with the originals lasting 10 years I do not mind buying new parts.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.