part number please m103 engine

[optimusprime]

Can anyone come up with the part number for the o ring that is fitted at the rear of engine lifting eye.The heater feed hose from rear of engine block fits on it.I have a water leak from this pipe It may be the same size as return to the pump heater pipe o ring . Car is w124 260e. Thank you .

 

[optimusprime]

Problem solved. Picked one up from MB .

 

[jaymanek]

The actual bore inside can become pitted, may be worth using some sealant to smear inside the bore, like hylomar or such...

 

[optimusprime]

thank you

jay yes i did check all looked fine.Though it was the head untill i put my hand around the bracket and it was comeing from the seal to heater pipe. Picked one up from Mercedes number -0129975148. I did think it was down in the thickness but i was told the item was the right one .So i spread hylomar over it .And on fitting it to the head , the spigot and o ring had a nice tight fit .Do hope it was that.And not the head gasket. Thanks for your post.