Part numbers needed for pushfit pipes on Mercedes C250 TD Sport Auto Estate 1998...

Page may contain affiliate links. Please see terms for details.

chizzel89

Active Member
Joined
Mar 29, 2010
Messages
79
Location
Pembrokeshire
Car
Mercedes-Benz C250 Turbodiesel Sport est. 155,000 mls. Peugeot 405 1.9 GLX TD Estate- 280,000 miles
Just started what I thought was going to be an easy and quick job... and behold, most of the pipes don't fit! Many of them barely resemble the ones coming off.

The part numbers on the invoice are:

A605 070 14 32
A605 070 15 32
A605 070 10 32
A605 070 12 32
A605 070 07 32

I also ordered the O-ring for the pre-filter and was given A601 997 01 48

Can anyone double check these?

There is only a couple of the pushfit pipes which are the right shape... typically the ones which are leaking the worst on my car aren't included. Grrr. So that's the car off the road for the best part of a week again.

I gave them the chassis number... how can it have gone so wrong?

Cheers
 
I have the same car and bought these parts a few months ago and they all fitted perfect.
There area 6 pipes -
605 070 12 32
605 070 10 32
605 070 15 32
605 070 07 32
605 070 08 32
605 070 14 32

Stop solenoid o ring - 021 997 75 48
Pre filter seal - 601 997 01 48

my local dealer were very helpful and gave me a diagram to check i had the right parts. Total cost about £50.

Hope this helps.
 

Users who are viewing this thread

Back
Top Bottom