Parts number for rear disc R129 Silver arrow??

Page may contain affiliate links. Please see terms for details.

noogieman

MB Enthusiast
Joined
Sep 20, 2005
Messages
2,773
Location
EU
Car
I Loewe Old Skool AMG
When I do my front C32 brakeswap with drilled rotors on my C43 AMG , I then want to match my front drilled rotors with drilled rear rotors from MB R129 Silver Arrow Edition.
Can someone help me finding correct partsnumber for drilled Silver Arrow rotors?

Questions about Silver Arrow rear rotors:
Regarding the diameter for rear R129 S-A rotors are they the same as on the C43 meaning 300mm?

C43 rear rotors are they standard MB rotors and not specific AMG stuff manufactured by SHW like front rotors?

Are them R129 S-A rotors bolt on without any modification, cutting or removing dustshield?

Hub screwhole on R129 S-A rotor is it drilled in correct place to be bolted onto C43 axle?

Thanks for your help.
 
Last edited:
Front rotors, 334x32mm (non-drilled) = 129-421-21-12
Front rotors, 334x32mm (cross-drilled) = 129-421-23-12
Front brake pads = 003-420-08-20 or 005-420-04-20 (OE), Porterfield AP-847, Akebono EUR847.

Rear rotors, 300x22mm (non-drilled) = 129-423-03-12
Rear rotors, 300x22mm (cross-drilled) = 129-423-05-12
Rear brake pads = 002-420-05-20 or 003-420-30-20 (OE), Porterfield AP-603, Akebono EUR603.
 
Front rotors, 334x32mm (non-drilled) = 129-421-21-12
Front rotors, 334x32mm (cross-drilled) = 129-421-23-12
Front brake pads = 003-420-08-20 or 005-420-04-20 (OE), Porterfield AP-847, Akebono EUR847.

Rear rotors, 300x22mm (non-drilled) = 129-423-03-12
Rear rotors, 300x22mm (cross-drilled) = 129-423-05-12
Rear brake pads = 002-420-05-20 or 003-420-30-20 (OE), Porterfield AP-603, Akebono EUR603.

finally some valuable information.
thank you very much.

does anyone know the size of C43 AMG rear rotors?
are they the same specs as Silver Arrow edition?
can I use my stock rear C43 calipers with S-A edition rotors?

did S-A cars come with 2 edition rear rotors?
crossdrilled and non drilled?

thanks
 
any adapters needed to fit S-A rear rotors?
how will the offset on these rotors be on an 18 inch wheel, any issues like rubbing?
 

Users who are viewing this thread

Back
Top Bottom