Sep 14, 2020 #1 M mbz124 Member Joined Sep 3, 2004 Messages 46 Hi all, I am about to pull take off the top of the dashboard to get at the M2/16 motor which is clicking. When I remove the top dash the passenger airbag has to be disconnected - does this require a reset afterwards with star? thanks
Hi all, I am about to pull take off the top of the dashboard to get at the M2/16 motor which is clicking. When I remove the top dash the passenger airbag has to be disconnected - does this require a reset afterwards with star? thanks
Sep 14, 2020 #2 Jobsworth MB Enthusiast Joined Sep 23, 2018 Messages 1,579 Location Horsham Car One or two... Presumably w203. If you keep the key out of the ignition you should get away with it. An ignition on cycle with the airbag unplugged will lodge a fault code
Presumably w203. If you keep the key out of the ignition you should get away with it. An ignition on cycle with the airbag unplugged will lodge a fault code
Sep 14, 2020 #3 OP OP M mbz124 Member Joined Sep 3, 2004 Messages 46 Thanks its for a W203. Would I be better off disconnecting the battery instead?
