Power Down Comand

[RussJ]

I need to cut power to my Comand 4.7 in my SL63 231.
According to the fuse chart, #28 (20amp) supplies Comand.
I've pulled it but Comand still works!
Can't immediately see Comand mentioned elsewhere on the fuse chart so am a bit stuck.
Be grateful for any suggestions (other than disconnect the main battery which I'll keep as a last resort).

Russ

 

[whitenemesis]

Sorry can't help regarding the fuses but am curious as to why you need to cut the power ?

 

[RussJ]

Trying to resolve a mucked up SatNav update. Comand is in a loop asking for a DVD and one suggestion in Xentry is to cut power for 15mins.
I decided to just disconnect the main battery and needless to say it hasn't fixed the problem.
Back to the drawing board...

 

[whitenemesis]

Hopefully the guys from Comand.co.uk will see this and offer a suggestion.

 

[richard]

You almost certainly need Xentry or Vediamo, or to take the unit out and change hard-drive - depending on exactly what has happened during the map update - to fix this problem. Ive seen a unit stuck forever too - something got set in the flash-ram that couldn't be un-set (but that may have been a co-incidental failure)

Fuse is F26, 20Amp which is in front SAM fusebox. Not F28!

Richard