Pre Safe and Air bag light on.

[S320 Ginger]

Hello all.

Can anyone please help me on this. My drivers window has stopped working so i decided yesterday to check the fuses. Like a dope i left the ignition on, engine not running and after checking all the fuses for the window were correct I started the car. The Pre safe and Air bag warning lights are now on. My friend has a scanner and its stating voltage drop at circuit 30 as the fault code. It will not removed the lights. Further to , the window is still out of action.
Any knowledge please..?

Thanks in advance....

 

[DSM10000]

I suggest finding a local MB Specialist with the Star computer and let them run a diagnostic, most generic fault code readers are not able to remove airbag and related errors .

Only Star or some of the more advanced systems such as Carsoft can usually re-set those warnings, Star can also fault trace for the issue with the window.

 

[S320 Ginger]

Thanks DSM10000. Just wondered if my stupidity would cause this or is it just coincidence..

 

[S320 Ginger]

How much is the carsoft module. ?

 

[DSM10000]

How much is the carsoft module. ?

I have no idea; a session with Star would be cheaper and you can be assured that Star (along with a competent user) could trace the problems.

I imagine the Pre safe and airbag lights are connected to fuse removals whilst the ignition was on. Hopefully a re-set should be all you need

 

[jaymanek]

guessing you have pulled out a fuse and put it back in wrong slot?

 

[S320 Ginger]

Hello Jaymanek
I will double check it tomorrow, but thinking on, one thing I did do was put a fuse in 112. It states on the chart that this is for power windows front so I placed it in there. Do you think it could be that?