PRE SAFE FUNCTIONS LIMITED

[SL350PAUL]

Hi All,

I wonder if you can help,

A couple of weeks ago I got a PRE SAFE functions limited see owners manual message on start up.... I press OK it clears and all is normal until next start up,

I also did a Carsoft scan of the front Radar sensors and this is what it came up with it seems the two middle columns with values change when driving and then say the same as the top and bottom columns ? as I said above when I drive the values on the middle two do come back from fault periodically ?

I have tried cleaning all the sensors that I know of and it does not seem to make any difference. I cannot seem to find anything on the net for the error code the carsoft is showing at the side, also when I go into fault codes on the car none are stored so it's like it's working normally ?

Anybody else had this ?

 

[OneForTheRoad]

First thing to do is give the battery a good charge up to eliminate a voltage issue.

 

[SL350PAUL]

First thing to do is give the battery a good charge up to eliminate a voltage issue.

Hi Thanks for the reply,

I have checked the voltage at the battery and it does seem ok, but I will give the battery a charge anyway to further rule that out as you said.

Thanks again for taking the time to reply