rear number plate plinth removal

Page may contain affiliate links. Please see terms for details.

tonyg1987

Active Member
Joined
Oct 31, 2015
Messages
239
Location
Aberdeen
Car
CLS63AMG, C63AMG Gone but not forgotten
Hello,

has anyone had their rear number plate plinth removed? any advice on how to?
 
If you mean the black plastic plinth that the number plate fits into, then if you look closely on the outside edges, you will see what it unclips and the top part lifts up and the lower part drops down and you can then remove the plate and get to the four screws holding the plinth in place on the body work.
 
Mine had metal plates and the rear was stuck to the number plate surround with double sided tape. I destroyed the surround trying to prise the plate off, good job I didn't want the surround with my replacement plates.
 
they do look like a pain and it seems they are rivet nuts. didnt bother in the end and just fitted the plate with the rivet nuts still on.
 

Attachments

  • image.jpg
    image.jpg
    229.3 KB · Views: 57

Users who are viewing this thread

Back
Top Bottom