Rear Reg Plate Fitting Help, C63 Maybe Other Mercedes Models

Page may contain affiliate links. Please see terms for details.

PhilT

Active Member
Joined
Aug 10, 2013
Messages
295
Car
C63 AMG Saloon
Right I have searched the net and cant find an answer so I am hoping someone may be able to help?

I have a private plate to put on the car but I don't want to screw the plate on and I don't want to use a plate holder as I don't like either. On my previous Audi I would just use sticky pads and put them to the boot of the car but Mercedes has a daft idea to put some big washers in the way that are not removable!

So my question is there some sort of plate bracket that can go over these washers then leave a square area to sticky pad the plate to but also screw the plate down in recessed holes so that the plate sits flush?

Please help :)
 
The rear plate on my car is inserted into a frame and stuck on. The frame is around 1cm deep and the circumference around the plate is only about 3 mm, so it doesn't look obtrusive at all. I am very pleased with how it looks!
 

No it isn't like that, More like two big washers

Worked for me

I fitted mine with the 6mm pads from halfords gets overt he washer/bolt problem

Thanks ill try that and see how it holds up
 

Users who are viewing this thread

Back
Top Bottom