the88g
Member
Hello
I've got the dreaded single window which will not operate. Rear right window is dead. Done my research, searched forums, below are my findings;
Regulator is working. Goes up and down with manual power. Error code from module reads; Memory overrun while writing to EEPROM (009266). Cleared it, no good, comes back. Related fuses all checked. Battery unplugged for a couple of hours. Nothing
Any ideas? Firmware upgrade needed? Whole new module?
CL63 from 2008. Am I right in saying there is only 1 rear control module for the coupe?
Thanks!
G.
I've got the dreaded single window which will not operate. Rear right window is dead. Done my research, searched forums, below are my findings;
Regulator is working. Goes up and down with manual power. Error code from module reads; Memory overrun while writing to EEPROM (009266). Cleared it, no good, comes back. Related fuses all checked. Battery unplugged for a couple of hours. Nothing
Any ideas? Firmware upgrade needed? Whole new module?
CL63 from 2008. Am I right in saying there is only 1 rear control module for the coupe?
Thanks!
G.