Removing a headlamp wiper

[AdamBoyse]

Following on from my previous thread about replacing a headlamp lens...

...I've figured out removal of the clips and undone the screws so that I can remove the plastic trim below the headlight... but...

Before I can do this I need to remove the headlamp wiper arm so that I can pull the plastic trim away from the headlight to get at the clips holding the lens in place.

Question is: How do I remove the headlamp wiper arm? There don't seem to be any obvious screws, bolts or clips holding it in place.

Cheers

Adam

 

[Simon]

Lift up the cover on the wiper arm, unscrew the nut, and pull the headlight wiper arm from the spindle.

HTH.

 

[AdamBoyse]

Thanks - I'll give it a go. To be honest I didn't see any type of cover - it seemed to be a fully integrated unit including the washer system. Anyway, I'll have a look.

 

[AdamBoyse]

Thanks for the help. The cover was just stuck on so with a bit of leverage it came off.

 

[Simon]

Well done.

 

[Brian WH]

Jim will fix it.:bannana: Or in this case Simon.:bannana: