Paulhick
Active Member
Afternoon people. After some advice again if possible please. The cup holder cover in my c204 has lost all the splines off the back of it so ordered a new one. Watched the howto video and replaced it no problem. Well I say no problem after 3-4 operations it went stiff and then decided to elevate itself of all its splines too. New new one has turned up and don’t want to fit it if it’s going to obliterate itself. Have noticed there is a divide/ end of the internal recess that the roller thing goes behind and I’m pretty certain this is what it catches on. Anyone got any better ideas before I take a couple of mil off the top of it?
many thanks.
many thanks.