Black560coupe
New Member
Hi this is my first posting on this forum. My car is a 560 SEC 1989.
I’ve owned the car for a few months now and I am working my way through the problems it has.
The problem I need advice on is:
When turning right on a roundabout, bend or junction a grating noise can be heard coming from the N.S.R? I suspected wheel bearings or worn trailing arm bushes causing compression of the drive shaft CV joints? When powering around bends the noise becomes a lot worse.
The noise appeared after the rear self levelling suspension was replaced with new coils and dampers by a local garage. I took the car back to them but they could not identify the cause. The car was taken to a second garage for more repairs; they could not identify the cause of the noise either.
I’ve owned the car for a few months now and I am working my way through the problems it has.
The problem I need advice on is:
When turning right on a roundabout, bend or junction a grating noise can be heard coming from the N.S.R? I suspected wheel bearings or worn trailing arm bushes causing compression of the drive shaft CV joints? When powering around bends the noise becomes a lot worse.
The noise appeared after the rear self levelling suspension was replaced with new coils and dampers by a local garage. I took the car back to them but they could not identify the cause. The car was taken to a second garage for more repairs; they could not identify the cause of the noise either.