Side Mirror Indicators
- Thread starter en8src
- Start date
-
- Tags
- indicators mirror
- Joined
- Nov 29, 2002
- Messages
- 7,668
- Location
- London\Essex
- Car
- E63s s213 2019, E55 2004 Silver-SOLD, E63 w212 Weistec AMG-SOLD, E55 2004-SOLD, C36 1997-SOLD
Steve, what car, and what are you trying to do exactly?
S
stargazerplus
Guest
Don't know if a c class mirror is the same as an s class where the housing slides off when you lever a clip. Details are here: http://www.mbworld.org/forums/showthread.php?t=115757
Barticus_UK
New Member
- Joined
- Mar 9, 2005
- Messages
- 26
- Location
- West Midlands
- Car
- His - C270CDI Avantgarde Auto Hers - A140 Elegance Auto
If its a W203 ( presume it is as you mention indicators ) HERE is a link to instructions I found when I changed my indicators. You do not need to remove the mirror glass, only the outer cover which slides off with the indicator still attached.
Hope this helps.
Hope this helps.
Last edited:
S
stargazerplus
Guest
Did you get this sorted? It was a very easy job to change these on the S
miro
MB Enthusiast
Was the mirror area first and then bend the housing towards the window to give you space to get a flat tool into the area that releases the clip.
Return the clip to the active position when done
Return the clip to the active position when done
High-Lo
MB Enthusiast
- Joined
- Sep 7, 2004
- Messages
- 1,798
- Location
- Kent
- Car
- 2013 X166 Mercedes GL350, Porsche 911 Carrera 4 Cabriolet, Porsche 968 Cabriolet
Has anybody ever taken the mirror housing off a facelift W210? I can't seem to be able to release the clip 
The pic below is of the nearside (passenger) mirror when folded. I just need to replace the blinker unit (cracked lens) but need to get the housing off first 
Can anyone point out where I should be jamming in my screwdriver please and what I need to do to release the clip.
TIA
Steve
The pic below is of the nearside (passenger) mirror when folded. I just need to replace the blinker unit (cracked lens) but need to get the housing off first
Can anyone point out where I should be jamming in my screwdriver please and what I need to do to release the clip.
TIA
Steve
High-Lo
MB Enthusiast
- Joined
- Sep 7, 2004
- Messages
- 1,798
- Location
- Kent
- Car
- 2013 X166 Mercedes GL350, Porsche 911 Carrera 4 Cabriolet, Porsche 968 Cabriolet
Heres another pic of the inside. You can see where my screwdriver has been and a bit to the right with what looks like the clip that I need to release. Can someone please confirm that I've been looking in the right place?
I've tried to move the clip every way but now worried I might break something soon
Cheers,
Steve
I've tried to move the clip every way but now worried I might break something soon
Cheers,
Steve
nick mercedes
MB Enthusiast
High-Lo said:Heres another pic of the inside. You can see where my screwdriver has been and a bit to the right with what looks like the clip that I need to release. Can someone please confirm that I've been looking in the right place?
I've tried to move the clip every way but now worried I might break something soon
Cheers,
Steve
You're in the right area, you might need a slimmer screwdriver, this is a picture of the clip you're after: http://www.frappr.com/antu/photo/3356281
Last edited:
High-Lo
MB Enthusiast
- Joined
- Sep 7, 2004
- Messages
- 1,798
- Location
- Kent
- Car
- 2013 X166 Mercedes GL350, Porsche 911 Carrera 4 Cabriolet, Porsche 968 Cabriolet
Thanks Nick. Do I have to wedge my screwdriver to the top of the clip and push in towards the car (assuming the mirror folded on the passenger side)?
Cheers,
Steve
Cheers,
Steve
nick mercedes
MB Enthusiast
High-Lo said:
You need to aim just in front of the part in your photo with all the scratches on and lever towards the car to release.
http://www.frappr.com/antu/photo/3356351
Last edited:
