Side Skirt W220 removal

Discussion in 'Bodywork' started by design guru, Nov 16, 2014.

  1. design guru

    design guru Hardcore MB Enthusiast

    Feb 28, 2004
    2001 W220 Mercedes S320cdi
    Hello all,

    I have decided to deal with the small patches of surface rust on my car myself. I have managed to get the rust removed back to bare metal but as some areas are near the edges I need to remove the side skirts. I can see the obvious bolts on the lower part of the wings but just wondered if there were any other bolts under the car or under the doors.

    It doesn't have an AMG kit fitted, just the standard panel

    W220 2001 S320cdi
  2. V8Rumble

    V8Rumble New Member

    Sep 24, 2014
    S430, 1966 Pontiac Ventura, Cosworth powered MK2 Granada
    You have to take the plastic sill cover strips off the doorsteps and a rubber seal pulls out. You will then see some more screws in the recess. There are also plastic plugs underneath that push into the sill itself.
    If you look here you can see the holes underneath and the other fixings are in the channel that runs along the top and holds the aforementioned rubber seal sill cover os 2206900440 mercedes w220 s class 99-05 sheffield | eBay

    I hope you do not find what I did.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.