davrum
New Member
Ideas please anyone, having turned ignition off in middle of putting hood down, I initially had lights flashing on roll bar switch and hood switch, having made sure everything was closed down and locked I now just have the roll bar switch flashing.
Press hood switch windows go down and clicks behind seats.
Press roll; bar switch the Hydraulics pump relay clicks but no pump, have also tested relay and - ok
have tested pump independently and it works.
Have checked to see if power coming through wires to the pump and no there isnt any power coming through the wires
I believe I have checked the fuses
Have just put meter across the pump power terminals before the relay and there appears to be a small current.
No Leaks, reservoir is full
Have done usual, disconnected battery, cleared error codes, window reset.
.Would very much appreciate any thoughts anyone might have, thanks in anticipation
Press hood switch windows go down and clicks behind seats.
Press roll; bar switch the Hydraulics pump relay clicks but no pump, have also tested relay and - ok
have tested pump independently and it works.
Have checked to see if power coming through wires to the pump and no there isnt any power coming through the wires
I believe I have checked the fuses
Have just put meter across the pump power terminals before the relay and there appears to be a small current.
No Leaks, reservoir is full
Have done usual, disconnected battery, cleared error codes, window reset.
.Would very much appreciate any thoughts anyone might have, thanks in anticipation