Some help would be greatly appreciated !

[mk2gti]

Hi im new to the forum and wondering if any of you guys would be able to help, i have a Mk2 golf gti running a eaton m62 supercharger which i believe is off a slk ? it has the electronic clutch on it....
Any way its making quite a bit of noise sounds as though its a bearing at the nose end of the charger, does any one know where you can get bearing kits/re-built kits from within the uk and can a solid/non clutched pully be fitted and is there a supplier for these.
any help would be great thanks.

 

[BlackC55]

The non clutch is fitted to the later SC. You may be able to get the part from your local MB dealer.

The bearings (I believe) are replaceable. There are people that do it. see G-werks - VAG Tuning : G60 Supercharger specialists

Those SC are noisey anyway. Are you sure they are worn?

 

[mk2gti]

HI is it the post 2000 model mercedes thats runs the solid pully ?
I called a few vw specialists today but once they found out that it wasnt the G60 charger they couldnt help other than give me a number for a company in America.
The noise isnt the usual whine from a vharger its a horrible rattle/grinding noise even at idle.

 

[alexander patie]

best bet is whip it off (small bolt and large circlip) and match up a new one from bearing factors. i have seen these bearings come loose on the housing and wear them away so have a good look.

 

[mk2gti]

Thanks, also would any one know what psi these run at and at what rpm please, thanks..

 

[mk2gti]

Hi i did a little digging today and found the clutch and bearing on it to be fine, i can hear the noise when manually turning the input shaft,the noise is from the charger so must be a bearing of some description inside. once the nose of the charger is off is there a coupler to the input shaft have seen a few of these for sale and supposed to be for a m62, just wouldnt mind a bit more info before i take it to bits tomorrow.