Jameshandford
New Member
Hey guys, I'm just installing a reverse camera and need to connect up to the 12v supply to the reverse bulb. Any idea what colour is which? I know that brown is ground.
Sprinter 2020 reverse bulb wiring colour
- Thread starter Jameshandford
- Start date
Page may contain affiliate links. Please see terms for details.
m80
MB Enthusiast
- Joined
- Apr 26, 2015
- Messages
- 5,703
- Location
- Derbyshire, High Peak
- Car
- Viano ex long, 651 2014. S211 646 2009 (till the Gov't drones blow 'em off the road)
On the n/s you might well find it's grey / black.
I would pierce with a drawing pin and confirm.
I would pierce with a drawing pin and confirm.
Jameshandford
New Member
There is white/blue, black/white, blue/yellow and black/red
m80
MB Enthusiast
- Joined
- Apr 26, 2015
- Messages
- 5,703
- Location
- Derbyshire, High Peak
- Car
- Viano ex long, 651 2014. S211 646 2009 (till the Gov't drones blow 'em off the road)
Please ignore the previous suggestion, I mis read my own notes. Apologies.
I have picked up Blue/white from the o/s. Again though pierce to confirm.
I have picked up Blue/white from the o/s. Again though pierce to confirm.
Jameshandford
New Member
Should it be the same colour for near side?
m80
MB Enthusiast
- Joined
- Apr 26, 2015
- Messages
- 5,703
- Location
- Derbyshire, High Peak
- Car
- Viano ex long, 651 2014. S211 646 2009 (till the Gov't drones blow 'em off the road)
I'm in hope hat MB are using some commonality across models.
Tbh w/o stripping mine down I couldn't say. But the drawing pin and a multimeter would confirm.
Justintyme
Active Member
Are you planning to use the reversing light as a direct supply to your camera? In my 2014 E class w212, all the rear lights are activated by data cables,,, and I used a by pass relay when attaching the trailer light board. For a sprinter, I'm not so sure. what year is it?.
