Sep 9, 2015 #1 D Damo201 New Member Joined Sep 9, 2015 Messages 3 Car Srpinter Hi, We currently have an 07 Sprinter Tipper. Can anyone suggest where we can buy some rear light protector cages for this? Many thanks, Damian
Hi, We currently have an 07 Sprinter Tipper. Can anyone suggest where we can buy some rear light protector cages for this? Many thanks, Damian
Sep 9, 2015 #2 D Deleted member 37751 Guest Definitely be worth trying the main dealer, Mercedes parts are famous for being either ridiculously expensive or ridiculously cheap.
Definitely be worth trying the main dealer, Mercedes parts are famous for being either ridiculously expensive or ridiculously cheap.
Sep 9, 2015 #3 Giantvanman MB Enthusiast Joined Dec 7, 2013 Messages 3,825 Location Essex Car FFRR 4.4 TDV8 Autobiography Try S & B Commercials at Stansted Tel: 01279 712200
Sep 9, 2015 #4 BTB 500 MB Club Veteran SUPPORTER Joined Aug 7, 2005 Messages 23,775 Location Shropshire Car R129 SL500, W639 Vito 120, S205 C300 Many (most?) commercial parts are surprisingly cheap from a dealer. S&B are very good.
Sep 9, 2015 #5 OP OP D Damo201 New Member Joined Sep 9, 2015 Messages 3 Car Srpinter Thanks for the advice so far, unfortunately this is not a dealer part. S&B were very helpful and suggested a "body builder", unfortunately the one suggested does not build these.
Thanks for the advice so far, unfortunately this is not a dealer part. S&B were very helpful and suggested a "body builder", unfortunately the one suggested does not build these.
Sep 9, 2015 #6 Howard MB Club Veteran Joined Apr 23, 2004 Messages 18,624 Location Toad Hall Car 2018 C63 Wagon / CLK430 / A150 / VW Pink Floyd Golf Cabriolet Is be inclined to go to your local metalworkers and ask them to make you some up out of weldmesh. Shouldn't be too expensive. You will need to decide on mounting centres , so they can weld lugs on. Then just spray them black so they don't rust although most weldmesh is galvanised.
Is be inclined to go to your local metalworkers and ask them to make you some up out of weldmesh. Shouldn't be too expensive. You will need to decide on mounting centres , so they can weld lugs on. Then just spray them black so they don't rust although most weldmesh is galvanised.
Sep 10, 2015 #7 OP OP D Damo201 New Member Joined Sep 9, 2015 Messages 3 Car Srpinter Thanks for the advice everyone, as suggested, I'll try a local metalworker.