joeg64
New Member
Dear all
2015 Mercedes w204 - C class coupe - cdi220
I'm troubleshooting a no connection problem between the airbag module (n2/10) and the front pedestrian/crash sensors b151/1 and b151/3.
Between the pedestrian/crash sensors (b151/1 and b151/3) and the airbag module (n2/10) there is a common connector (x26/38), where, if i had this feature on my car the Distronic sensors would, also be connected .
Could someone please tell me where i can find connector x26/38?
It was a salvage car. So front end was damaged.
The 2 wires from the left and right (b151/1 & b151/3), pedestrian crash sensors. Head straight back from the front bar around the engine join the loom
From there, (possibly!) somewhere between the bulk head and the airbag controller is connector x26/38
I have the center console removed next step would be to remove the passenger side carpet and passenger seat if necessary to trace the airbag module wiring loom back to the engine bay.
Any assistance would be greatly appreciated
Best regards
Joe
2015 Mercedes w204 - C class coupe - cdi220
I'm troubleshooting a no connection problem between the airbag module (n2/10) and the front pedestrian/crash sensors b151/1 and b151/3.
Between the pedestrian/crash sensors (b151/1 and b151/3) and the airbag module (n2/10) there is a common connector (x26/38), where, if i had this feature on my car the Distronic sensors would, also be connected .
Could someone please tell me where i can find connector x26/38?
It was a salvage car. So front end was damaged.
The 2 wires from the left and right (b151/1 & b151/3), pedestrian crash sensors. Head straight back from the front bar around the engine join the loom
From there, (possibly!) somewhere between the bulk head and the airbag controller is connector x26/38
I have the center console removed next step would be to remove the passenger side carpet and passenger seat if necessary to trace the airbag module wiring loom back to the engine bay.
Any assistance would be greatly appreciated
Best regards
Joe