Killerbunny14
New Member
Hi All,
New to the forum.
We have an 814 vario 2009 that we are converting to a camper.
The rear discs are shot so we are changing them. All going swimmingly until we tried to get the hub nuts off. Bought the proper hub tool, 3/4 head 800mm breaker bar. I know the tab has to be knocked back but couldnt really find it and it looks like someone before had a good go with a hammer and chisel around the hub.
Could not move it. Actually bent the breaker bar so does any one have any advice and am I missing something.
TIA
Dean


New to the forum.
We have an 814 vario 2009 that we are converting to a camper.
The rear discs are shot so we are changing them. All going swimmingly until we tried to get the hub nuts off. Bought the proper hub tool, 3/4 head 800mm breaker bar. I know the tab has to be knocked back but couldnt really find it and it looks like someone before had a good go with a hammer and chisel around the hub.
Could not move it. Actually bent the breaker bar so does any one have any advice and am I missing something.
TIA
Dean



Last edited: