Viano W639 How to replace front fog bulb?

[Bladgb]

Err thus might seem a dumb question but how does the connector come off the back of the bulb?

I easily replaced the dipped beam bulb with a Nightbreaker, read up on here the difficulties of changing the main beam bulb with the two torx screws and postponed changing those for nicer weather.

Then I tried my new dipped bulbs and it looked less yellow until I locked the car to go back inside and the "see me home" function came on where the fog lamps come in for 15s or so. These looked really yellow so I figured I will change these to Nightbreakers but couldn't work out how to take the connector off :dumb:

I don't have a owner manual, the online one is for the post 2010 facelift, and WIS says "refer to owners manual"!

 

[zenman63]

Look close there is a tag on the spade connector, it needs pushing down.

 

[Bladgb]

Neat. Thanks

 

[Bladgb]

All done, easy when someone points out what to do.

Changed the main beam bulbs too, the torx screws only need to be undone a bit to allow the bulb to turn and pop out.

 

[M0HAO]

Another dumb question...
Do you know which one is the fog bulb in next light ?