Vito 114 651 wastegate fault.

Page may contain affiliate links. Please see terms for details.

Vito114irl

New Member
Joined
Sep 5, 2020
Messages
2
Location
The moon
Car
Vito 114 2.
Hello ,
Just on my third Vito , had the original 108d in 98 ,111 in 2004 and now have a 2016 114 2.2

Having limp mode at the moment , errors first showed Nox sensor and wastegate fault.
After clearing them , just getting a recurring wastegate error. When I suck on the wastegate pipe it's pulling the arm of the turbo.
The solenoid is not activating as I have a guage on it and no pressure change.

I followed the pipes to a manifold of some sort located above egr area , there is oil inside the pipes at this location , not much but definitely wettish.
I had my local Merc dealer run the diagnostics and they say there is a leak, more than likely the intake manifold . But they are not sure and will do a pressure test.

I have electronic manometer and I'm getting a slight drop , but not much at all and definetly not enough to cause the wastegate to fail.
If I'm getting a wastegate fault , surely there can't be another sensor that is causing the wastegate solenoid not to activate.
Hopefully someone can help ,
Thank you.
 
Are these codes familiar to anybody , these all came up a week after I got a service at my Merc dealer :(

B2AAA - Body Tap 'Web' for more information

PO299 - Powertrain Tap 'Web' for more information

P2201 - Powertrain NOx Sensor Circuit Range/P bank1

P2261 - Powertrain Turbo/Supercharger BypassMechanical
 

Users who are viewing this thread

Back
Top Bottom