Vito 62 reg anti roll bar

[t567wab]

Hearing some knocking on the roll bar I've decided to replace the bushes.
Had few Vitos before (older ones) so didn't expect any problems but...

Did anyone came across a necessity of replacing whole bar? Which way would you/did you do it?

Newer bushes are pressed on the bar so the whole bit needs to be swapped.


P.S. Luckily it was only £106.20 from Marshalls Croydon.

 

[Gaz C220-Vito]

Hi.

Unfortunately I don't have an answer but it seems we're in the same boat. My bushes are clamped around the bar so spoke to MB and they confirmed for my 2010 it's a hole assembly (bar, bushes and clamps fitted). I bought one but for the life of me I can't get the old one out. Have you had a go or heard anything? Cheers

 

[clk320x]

Hi.

Unfortunately I don't have an answer but it seems we're in the same boat. My bushes are clamped around the bar so spoke to MB and they confirmed for my 2010 it's a hole assembly (bar, bushes and clamps fitted). I bought one but for the life of me I can't get the old one out. Have you had a go or heard anything? Cheers

Just to let you know that this thread is almost 4 months old.