w124 e200 1995 coolant sensor

[seany260]

Hello, what is the correct ohm readings on the 4pin cts. I read 1.8kohm and 4.5kohm on the pin diagonially . Car was just above cold, prob some were between 30-50 degrees.

Also what diagnostic device is used to read these cars.


Look forward to a reply
Thanks

 

[carat 3.6]

You need a flash code reader to check fault codes.

 

[seany260]

Thanks, know anyone sells them here in the UK? Can't seam to find anything on fleabay.

 

[seany260]

Its ok I've just made one.

 

[anfieldassasin]

any chance you would post instructions or point to instructions that you used to make one?

Cheers

Sam