w124 passenger side airvent ilumination

Page may contain affiliate links. Please see terms for details.

badshot1uk

Active Member
Joined
Jul 25, 2003
Messages
107
Location
Orpington, Kent
Car
1991 300 TE 24V Sportline, 2001 Chipped Picasso 2.0 HDI
I have noticed this evening that my passenger side airvent thumbwheel isnt lit up like the centre and drivers side?

Is it a bugger to change the bulb as it looks it?

cheers

paul

:confused:
 
badshot1uk said:
I have noticed this evening that my passenger side airvent thumbwheel isnt lit up like the centre and drivers side?

Is it a bugger to change the bulb as it looks it?
You "just" need to pull the vent. It has four spring clips that slot into the vent tube behind. You need to feed a narrow screwdriver / 3 mm allen key / etc into each one, pull it open, open the car door, tease the edge of the vent and pull the vent towards you, all at the same time. That means you need 6 hands

Get a powerful torch and shine it into the vent and you'll see the spring clips. Have a think about it and you'll see how they work

The new bulbs from the dealer will be brighter than the originals as they won't have the thin coating the originals have. This may annoy you when the new bulbs are in - but not half as much as the fitting them will!

Good luck

Nick Froome
www.w124.co.uk
 

Users who are viewing this thread

Back
Top Bottom