W126 ride height

  • Thread starter Deleted member 11979
  • Start date
Page may contain affiliate links. Please see terms for details.
D

Deleted member 11979

Guest
My recently acquired w126 300se is sat too high one the drivers side front corner.

What are the things to check?

It seems unnaturally high so I don’t think it’s that the rest of the car is too low, in fact it all looks a bit higher than it should.

Can rubber spacers be fitted to a w126 as they can on a w124 to adjust ride height?

Would the incorrect spring (from a v8 or diesel) cause a 2 inch variation?

On the passenger side the top of wheel to arch is about 85mm, drivers side about 130mm

Many thanks
 
Possibly incorrect replacement spring fitted?
 
Or just 1 New spring fitted
 
Ordered a couple of new front springs from Mercedes, see if that cure it
 
Didn’t cure it

Went through the points system to determine which springs it needs and long story short the car sits even higher , 720mm from floor to highest point of underside of front arch!

Maybe that’s the way it should be?
 

Users who are viewing this thread

Back
Top Bottom