W202 cuts out under braking

Page may contain affiliate links. Please see terms for details.

cp366kta

New Member
Joined
Apr 14, 2016
Messages
1
Car
C200 Auto Elegance
Hi, my 1999 W202 Petrol Auto Elegance has a serious issue.
Sometimes when you touch the brake the engine will cut out and the dash lights flash rapidly about three times.
You have to roll to a stop and then re-start it, which it does without a problem.
We have changed crankshaft sensor, fuel filter and brake light switch to no avail.
Does anyone know what might be causing this? No fault codes are registering.
 
i would look at the BAS unit. it adds huge amount of braking in an emergency by dumping the vacuum into the brakes... ina petrol that might cause a stall? the bas system isnt very reliable. its changeable quite easily on the brske vacuum chamber without much removal of stuff, but fiddly.
 
I have a BAS unit for sale in the classified for sale section for the W202 if you need one.
 
might also be worth checking if you have a vacuum leak possibly at servo or in inlet pipes/tubes?
 

Users who are viewing this thread

Back
Top Bottom