brens-e200
Active Member
hi,
a friends 2002 w203 drivers seat electrics are not working . I have verified that the ground and constant 12 volts exist but not the switchable 12 volts. I have verified the fuses and all ok. The passenger side works fine.
I disconnected the loom as far as it would let me and while pulling on the switchable 12v cable could find no physical brake in the cable ( without been too rough on it ) .
My question is is there an easy 12v switchable location I could take a link from and feed it into the connector ( after first splitting the cable )
thanks in advance
brendan
a friends 2002 w203 drivers seat electrics are not working . I have verified that the ground and constant 12 volts exist but not the switchable 12 volts. I have verified the fuses and all ok. The passenger side works fine.
I disconnected the loom as far as it would let me and while pulling on the switchable 12v cable could find no physical brake in the cable ( without been too rough on it ) .
My question is is there an easy 12v switchable location I could take a link from and feed it into the connector ( after first splitting the cable )
thanks in advance
brendan