w203 puddle lights

Page may contain affiliate links. Please see terms for details.

riz_k

Active Member
Joined
Feb 22, 2012
Messages
101
Car
w203 c180k sport edition
Hi guys bought my self a w203 c180k sport edition last saturday and i love it, anyway i changed my grab handle yesterday and when i removed the doorcard i noticed there was already a cut out for puddle lights i just wanted to know what parts are needed and what wiring is involved. can the puddle lights only be installed in the front or at the back aswell?

Riz
 
Anyone know part numbers? Ill try and do a full write up inc pics of retrofit
 
This site should help:

PARTSCATALOG.RU

Enter your VIN in that box and a bit of playing round with links on the next page should find you the parts page
 
This site should help:

PARTSCATALOG.RU

Enter your VIN in that box and a bit of playing round with links on the next page should find you the parts page

Thanks for that mate ill have a check tomorrow hopefully my local mb dealer will have the parts in stock
 
Does anyone know the part number for the proper loom don't really want to bodge one together
 
The original puddle lights harness has been LONG discontinued however there is a replacement along with all the parts you need:

Harness - A639 540 70 09 - x2
Light Units - A126 820 13 01 - x2
Bulbs - N000000 002723 - x2

On the old harness you had to crimp contact bushings but with this new harness they are pre-crimped but in a different plug connector which is included. Just extract from the plug connector provided and insert into the connector that goes into the door module. Simples !
 
Last edited:
Hi,

I have puddle lights fitted to mine (factory fitted) and they are only fitted to the front doors. The back door card is much narrower at the bottom, so if any are available they would need to be much narrower and completely different fitting.
 
The original puddle lights harness has been LONG discontinued however there is a replacement along with all the parts you need:

Harness - A639 540 70 09 - x2
Light Units - A126 820 13 01 - x2
Bulbs - N000000 002723 - x2

On the old harness you had to crimp contact bushings but with this new harness they are pre-crimped but in a different plug connector which is included. Just extract from the plug connector provided and insert into the connector that goes into the door module. Simples !

gurpz your a legend mate thanks for that:thumb:
 
Hi,

I have puddle lights fitted to mine (factory fitted) and they are only fitted to the front doors. The back door card is much narrower at the bottom, so if any are available they would need to be much narrower and completely different fitting.

ahh right thought so ill get the fronts in :thumb:
 
Will do, going to order the parts tomorrow hopefully they'll be here for the weekend so I can crack on
 

Users who are viewing this thread

Back
Top Bottom