steam_biker
Member
- Joined
- Feb 20, 2011
- Messages
- 51
- Location
- Cumbernauld
- Car
- W211 E320 sport Yamaha FZR 600 Genesis 1991
I started to strip my rear suspension to renew the tie bars and back plate when I discovered that I didn't have a socket to remove the nut holding the drive shaft to the rear hub.:fail
I have a 32mm socket, too small. my 34mm was too big. It looks like a splined nut. Where can I buy the correct socket? Thanks in anticipation.
I have a 32mm socket, too small. my 34mm was too big. It looks like a splined nut. Where can I buy the correct socket? Thanks in anticipation.
