W208 CLK Undertray Required same for all 208's?

Discussion in 'Bodywork' started by tjamesbo, Aug 16, 2014.

  1. tjamesbo

    tjamesbo Hardcore MB Enthusiast

    Messages:
    525
    Joined:
    Jan 6, 2007
    Location:
    Sutton Coldfield Midlands
    Car:
    CLK430 ,Vito V6 sport ,Jaguar 2.5 X type ,W124's 1993 220TE , 1994 320TE ,Mastercraft X5
    My 1999 CLK 430 requires the plastic Engine Undertray are the Undertrays the same for all 208's ???? I would have thought so, but not sure. I dont know how to access the Parts thing to check If they are .Hopefully I could then get one from any Breaking 208
    Thanks

    Boyd
     
  2. andy27168

    andy27168 Hardcore MB Enthusiast

    Messages:
    4,350
    Joined:
    Nov 27, 2004
    Location:
    Southampton
    Car:
    1997 C230K, 1999 C43/55 AMG
    The under tray is a different pt. no. on the 208 dependant on engine variant, one type for the 4 cylinder, and another type for the V6 and V8s.
    Not only did the V engine have a different undertray but it also had a slightly different set up to the 4 cylinder engines as it was attached differently to the underneath of the car.
    I answered this on the other forum, but what I said has been questioned, but I can assure you this info is taken straight from EPC.
    If you read below, then this will give you definitive pt. no.s and compatible donor cars for the part though I bought one for my C43 and it was only about £25 from MB though this was a few years ago now, so will have gone up.
    EPC 052-060, Illustration 2, Item 5, A 202 524 01 01 "Protective plate", applicable to the 208365 (CLK320), 208370 (CLK430), and 208374 (CLK55), as well as some 202 applications.
    EPC 052-060, Illustration 1, Item 5, A 202 524 04 30 "Panelling (Engine Compartment)", applicable to the 208335 & 208435 (CLK200), 208344, 208345, 208444 & 208445 (CLK200 Kompressor), 208347, 208348, 208447, & 208448 (CLK230 Kompressor), and as above some 202 applications.
     
    1 person likes this.
  3. OP
    OP
    tjamesbo

    tjamesbo Hardcore MB Enthusiast

    Messages:
    525
    Joined:
    Jan 6, 2007
    Location:
    Sutton Coldfield Midlands
    Car:
    CLK430 ,Vito V6 sport ,Jaguar 2.5 X type ,W124's 1993 220TE , 1994 320TE ,Mastercraft X5
    Thanks for that Andy (bigasaton ) I have a V6 202 and looking at whats been said It might fit the 430 , still I need another but it might be quick way I can check
    so I think I'm looking for one from A CLK 320 or 430 but not a 4 Cyl
    and possibly one from a C240 I'll take the one off the 240 see if it fits if it does I have a wider choice of Donor vehicles
    Thanks
    Boyd
     
    1 person likes this.
  4. andy27168

    andy27168 Hardcore MB Enthusiast

    Messages:
    4,350
    Joined:
    Nov 27, 2004
    Location:
    Southampton
    Car:
    1997 C230K, 1999 C43/55 AMG
    As the 208 was effectively a 202 it would follow that V engined 202s would be also the same, though for some reason I did note that its not the same as a 43 undertray which surprised me as I thought I could of helped you out as I have a new spare one, like I said get a price from MB as I don,t think they are that expensive new.
     
    1 person likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.